I regularly have the need to try things out on Linux. Sometimes a virtual machine won't cut it for me typically due to memory, disk and performance limitations. Moreover, a decent, up-to-date, bootable Linux environment is a great backup in case all of my other computers are broken, infected or stolen. That entails having the Linux installation on an external, USB-attached hard disk drive which can boot with relative ease on any UEFI-enabled PC (driver compatibility notwithstanding). Moreover, all the preparatory work has to be performed using a single-boot Windows computer without ending up having a dual boot system. It sounds tough. It is tough, but I'm writing this from my portable Ubuntu Linux installation running off a USB-attached SSD!
- Creating a bootable Ubuntu 16.04 USB from Startup Disk Creator. Try Ubuntu before you install it. To create a USB stick from which you can install Ubuntu, you must first download Ubuntu and, if you want, verify the download. Then, follow these instructions: Insert a USB stick with at least 2GB of free space.
- UNetbootin is another tool that allows you to create bootable USB drives as it either downloads the ISO file or you can provide the downloaded ISO file to create a bootable disk easily. With UNetbootin you can create bootable disks for Ubuntu, Fedora and other Linux distributions easily.
- Select 'Create a bootable disk using ISO' Select the Ubuntu ISO. Make sure that Rufus hasn't changed the partitioning scheme after you have selected the ISO. When Rufus is ready with your stick, you will have a stick with a UEFI bootloader. Booting a machine with this stick allows you to boot an Ubuntu live session so that you have access.
What you need
Make Ubuntu Bootable Flash Drive
Creating a bootable live CD/DVD allows you to Install Ubuntu, or another Linux Distro, on your Computer or even just try it without installing it. Note: Ubuntu 12.10 onwards requires a DVD, due to the increase in the image size it will not fit on a CD. Create an ESP on the Ubuntu HDD. A hard drive is not bootable with UEFI unless it has an ESP (EFI System Partition). An ESP is simply a FAT32 partition with a special flag that tells the EFI BIOS to look inside it for boot information. We have to create one on your hard drive. Plug in your external HDD and the Ubuntu Linux bootable USB stick.
- An empty external (USB) hard drive. I used a USB 3 drive enclosure with a cheap 256Gb SSD. For those of you worrying about performance, the USB 3.0 port is faster than the maximum transfer rate of any SSD I've seen to this date.
- Ubuntu Linux bootable USB drive. Very easy to create using Rufus on Windows. I used a cheap, promotional flash drive. Reduce, reuse, recycle FTW.
- Windows System Repair Disc (a bootable USB drive with Windows recovery tools which you can make yourself) or a Windows installation or rescue CD-ROM / DVD-ROM. I used another promotional flash drive.
Remember to take backups of all your critical files and folders before continuing. You are going to make changes to your computer. If it breaks don't cry, I warned you. Also test both your bootable media. Twice. You will need them both!
Caveats
Having a dual- or multi-boot system isn't as straightforward as it used to be a decade ago. Nowadays, in the interest of security, performance and backwards compatibility, there are many semi-hidden options and features which can get in your way. Given enough experience and patience you can work around them. Below is a selection of problems that got me moderately stumped along the way.
Secure boot caveat
I have only tested these instructions with Secure Boot turned off. Even though Ubuntu does support Secure Boot (it comes with signed bootloaders) I have no idea if my method uses the signed bootloaders or not. I suggest turning off Secure Boot if possible. Master boot record sd card.
FastBoot caveats
Many boards come with some sort of 'fast boot' or 'boot optimization' options. For example, my Intel NUC has an option called Fast Boot which won't let me choose an alternative boot device at startup. It also has an option to support Intel Rapid Start Technology which does get in the way of booting to multiple OS. I had to disable both.
It's worth noting that Windows 8 and 10 have an Fast Startup or Fast Boot feature. This feature takes some shortcuts when it comes to booting and also makes the NTFS filesystem remain in a dirty state, making it unwriteable from Linux. It's best to understand what it does and disable it if you plan on writing to your Windows drive from Linux.
USB host controller caveat
Why isn t my xbox app working. Some firmwares will present the USB host controller as UHCI (USB 1.1) at boot time. When Linux probes for an xHCI (USB 3) host controller during the boot process they will respond positively. At this time Linux loads the xHCI driver and the USB host controller resets itself.
However, your root filesystem is inside a device attached to this USB controller. Therefore the controller resetting means that Linux can no longer communicate with the USB-attached hard drive. Apple a1243 keyboard not working. Therefore the Linux boot will hang forever without any further indication as to what went wrong.
Most affected boards (including my Intel NUC) have an option to enable the xHCI host controller interface by default. Enabling the xHCI option in the BIOS fixes the hanging boot issue. If you are only using modern operating systems with USB 3 support (anything newer than and including Windows 8.1 and Ubuntu Linux 15.04) you can safely enable that option.
Installing Linux
Boot your computer from the Ubuntu Linux bootable USB drive. Remember that you may have to enter your computer's boot manager to do that (on my Intel NUC I have to press F10; on most other BIOS I've seen it's F9; consult your BIOS documentation).
Install Ubuntu Linux regularly. When it prompts you about the disk layout choose Something Else and partition your external HDD the way you want. I chose to create a modestly sized root partition (about 40Gb), a swap partition that's as big as the biggest RAM configuration I am going to be using this installation with plus one Gb (my computers max out at 16Gb so I made a 17Gb swap partition) and the rest of the disk went to a massive /home partition.
Caveat: I chose to use btrfs which – as I learned along the way – makes things a bit more complicated down the line. For your sanity's sake I recommend using ext4. This guide assumes the use of btrfs and will point out the caveats with this approach.
Fix Windows 10 boot
Unfortunately the Ubuntu Installer assumes that you want a dual booting configuration alongside Windows. Therefore it adds itself (actually, the bootloader it uses, GRUB2) to your computer's UEFI configuration. This causes two problems. For starters, the external HDD is not portable as you cannot boot with it on another computer.
Secondly, if you remove this external HDD your Windows won't boot. Bummer. We have to fix that.
- Shut down your computer.
- Disconnect the Ubuntu HDD
- Boot from the Windows system repair disc USB drive (or a Windows installation or rescue CD-ROM / DVD-ROM).
- Select Repair your computer.
- Select the operating system and click Next.
- Choose Command Prompt.
- In the command prompt run
- Verify that the EFI partition is using the FAT32 file system. It will have a volume ID, let's say 99. Now we need to assign a drive letter to it. Back in the command prompt type:
- Now we need to fix the boot record. Again in the command prompt type:
- Finally, we need to re-create the BCD store which tells the Microsoft boot loader where to find Windows so it can boot it. From our trusted command prompt:
- If this didn't work try
At this point exit the command prompt and shut down your computer.
Create an ESP on the Ubuntu HDD
A hard drive is not bootable with UEFI unless it has an ESP (EFI System Partition). An ESP is simply a FAT32 partition with a special flag that tells the EFI BIOS to look inside it for boot information. We have to create one on your hard drive.
- Plug in your external HDD and the Ubuntu Linux bootable USB stick.
- Boot with the Ubuntu Linux bootable USB stick using the option to try Ubuntu before installing.
- Open a Terminal (CTRL-ALT-T)
- Run
sudo fdisk -lto get a list of partitions. - Identify from them the drive that has the Linux partitions, in my case /dev/sdb. I'll call it /dev/sdX from now on.
- Also identify the partition that contains the root filesystem. I will call it /dev/sdXY from now on.
- Launch GParted from the Terminal: Why not just click on GParted on your desktop? Well, I kept receiving errors about the Ubuntu Linux bootable USB stick because it was already in use. Of course it is, I am using it to run the computer off it, duh!
- Resize the first partition on disk to have another 200 Mb of free space after it.
- Create a new partition on the free space, changing the file system to fat32.
- Apply operations. You need to do that now for the next step to be possible.
- Right click the new partition.
- Click on Manage Flags.
- Set the boot and esp flags. This is what makes the partition 'special' to the EFI BIOS.
- One more thing! Note down the the partition that contains the ESP filesystem. I will call it /dev/sdXZ from now on.
Make sure the Ubuntu installation on the external HDD can see the ESP
The new ESP on the external drive must be visible by the Ubuntu installation in the HDD. Otherwise GRUB2, the Linux bootloader, won't be able to update itself, making your system unbootable after the next kernel update at the latest.
- Launch GParted from the Terminal, as we saw above:
- Double click the partition with your Linux root (/) filesystem on the external HDD
- Note down the UUID, e.g. 01234567-89ab-cdef-0123-4567890abcde
- Double click the new FAT32 partition and note down the UUID, e.g. 0123-ABCD
- Close GParted
- Open a Terminal
The process is different depending on the format of your root partition on the external hard disk.
If you DID NOT use btrfs (e.g. you used ext4)
If you DID use btrfs
If you DID use btrfs, you made your life complicated. We need to mount the btrfs subvolume containing the root partition instead of the entire partition. Otherwise you'll never be able to install GRUB and you'll probably lose an entire day, like me.
This will give you a line with a numeric ID. Let's say 123. Note it down.
The rest of the instructions are common, no matter if used btrfs, ext4 or something else
- There is a line with /boot/efi already in this file. Comment it by placing a # in front of it.
- Add the following line:
Install GRUB2 on the external drive's EFI System Partition
Right now our external drive has an empty ESP. We need to put a bootloader in it to make it actually, well, bootable.
First caveat: all the instructions you find on-line assume you are using a dual boot system with Windows or macOS. When you have an external drive it is critical that you use the --removable option in the last step. This installs the EFI bootloader under the special 'fallback path' EFIBootbootx64.efi in the ESP. Normally this not supposed to be used for permanently installed Operating Systems. It's the mechanism used by EFI BIOS to boot arbitrary external media. Technically, that's exactly what our external hard drive is: arbitrary external media!
Second caveat: installing the bootloader is only possible from inside the Linux installation we want to boot. However, we need the bootloader to boot that installation, leading to a Catch-22 issue. The solution is to run the bootloader installation through a chroot jail. The actual caveat that got me stumped for a day comes from the fact that I am using btrfs (because it's so much better for SSDs!). btrfs has subvolumes. If you mount the entire partition instead of a subvolume the grub-install script can't figure out the mapping between paths and devices, therefore failing to install itself on the ESP, returning the cryptic error
The error is misleading! /dev is mounted if you follow my instructions below. The actual problem, as I understand it, is that there is a discrepancy between the mounted device and the path to the chroot root. That's why I had you mount only the subvolume containing the root filesystem in the steps above. If you were not paying attention, you are not following the instructions step-by-step, you rebooted before this step or just came here directly looking for a solution to your problem about GRUB not installing look above for instructions on mounting the correct btrfs subvolume.
- We need to prepare the chroot environment. The ESP must be mounted in the correct place and we have to bind system mount point for some special trees (most notably /dev). Moreover, we will copy the resolv.conf file to let the chroot environment have network access should it need it.
- Finally we enter the chroot environment and install Grub in a way suitable for a removable device (see the first caveat above).
Now your external HDD is bootable. Reboot your computer, select it from the boot media selection of your UEFI BIOS and you're done!
If you are Ubuntu's fan and want to try out its latest Focal Fossa 20.04 LTS Linux distro, then you can do it using a bootable USB drive created on Windows 10/7/8…
Well, the Ubuntu 20.04 is here and we can try it out before the actual launch slated at the end of April 2020. The focal fossa bootable ISO file is available to download which we can try out directly on Virtual Machines; however, those want to install or test it Live on PC they can create a bootable drive using software like Rufus.
Although it is very simple to create a bootable drive using Rufus, still, those are new to it they can see the below-given steps. Memorex cd dvd labels.
Download Ubuntu 20.04 LTS ISO
If you already have downloaded Ubuntu 20.04 then simply move to next step and if not then here is the link to get its ISO file.
Get Rufus USB bootable creator
So, Rufus is the nifty software for creating Linux bootable USB drive on Windows 10 or 7. Go to Rufus.ie get this portable software, yes we don't need to install it just download the setup, double click on it and you are good to go.
Run Rufus and select Ubuntu 20.04 ISO
As Rufus gets opened you will see a couple of options, however, only two things which we need to be set: First, select the USB drive attached to your system that you want to use and second is the selection of ISO file of Focal Fossa. After that simply click on the start button. For more clear idea see the below screenshot.
Set Rufus to create Ubuntu 20.04 ISO bootable drive
Wait for a few minutes, once the USB drive becomes bootable the Rufus will show that.
A hard drive is not bootable with UEFI unless it has an ESP (EFI System Partition). An ESP is simply a FAT32 partition with a special flag that tells the EFI BIOS to look inside it for boot information. We have to create one on your hard drive.
- Plug in your external HDD and the Ubuntu Linux bootable USB stick.
- Boot with the Ubuntu Linux bootable USB stick using the option to try Ubuntu before installing.
- Open a Terminal (CTRL-ALT-T)
- Run
sudo fdisk -lto get a list of partitions. - Identify from them the drive that has the Linux partitions, in my case /dev/sdb. I'll call it /dev/sdX from now on.
- Also identify the partition that contains the root filesystem. I will call it /dev/sdXY from now on.
- Launch GParted from the Terminal: Why not just click on GParted on your desktop? Well, I kept receiving errors about the Ubuntu Linux bootable USB stick because it was already in use. Of course it is, I am using it to run the computer off it, duh!
- Resize the first partition on disk to have another 200 Mb of free space after it.
- Create a new partition on the free space, changing the file system to fat32.
- Apply operations. You need to do that now for the next step to be possible.
- Right click the new partition.
- Click on Manage Flags.
- Set the boot and esp flags. This is what makes the partition 'special' to the EFI BIOS.
- One more thing! Note down the the partition that contains the ESP filesystem. I will call it /dev/sdXZ from now on.
Make sure the Ubuntu installation on the external HDD can see the ESP
The new ESP on the external drive must be visible by the Ubuntu installation in the HDD. Otherwise GRUB2, the Linux bootloader, won't be able to update itself, making your system unbootable after the next kernel update at the latest.
- Launch GParted from the Terminal, as we saw above:
- Double click the partition with your Linux root (/) filesystem on the external HDD
- Note down the UUID, e.g. 01234567-89ab-cdef-0123-4567890abcde
- Double click the new FAT32 partition and note down the UUID, e.g. 0123-ABCD
- Close GParted
- Open a Terminal
The process is different depending on the format of your root partition on the external hard disk.
If you DID NOT use btrfs (e.g. you used ext4)
If you DID use btrfs
If you DID use btrfs, you made your life complicated. We need to mount the btrfs subvolume containing the root partition instead of the entire partition. Otherwise you'll never be able to install GRUB and you'll probably lose an entire day, like me.
This will give you a line with a numeric ID. Let's say 123. Note it down.
The rest of the instructions are common, no matter if used btrfs, ext4 or something else
- There is a line with /boot/efi already in this file. Comment it by placing a # in front of it.
- Add the following line:
Install GRUB2 on the external drive's EFI System Partition
Right now our external drive has an empty ESP. We need to put a bootloader in it to make it actually, well, bootable.
First caveat: all the instructions you find on-line assume you are using a dual boot system with Windows or macOS. When you have an external drive it is critical that you use the --removable option in the last step. This installs the EFI bootloader under the special 'fallback path' EFIBootbootx64.efi in the ESP. Normally this not supposed to be used for permanently installed Operating Systems. It's the mechanism used by EFI BIOS to boot arbitrary external media. Technically, that's exactly what our external hard drive is: arbitrary external media!
Second caveat: installing the bootloader is only possible from inside the Linux installation we want to boot. However, we need the bootloader to boot that installation, leading to a Catch-22 issue. The solution is to run the bootloader installation through a chroot jail. The actual caveat that got me stumped for a day comes from the fact that I am using btrfs (because it's so much better for SSDs!). btrfs has subvolumes. If you mount the entire partition instead of a subvolume the grub-install script can't figure out the mapping between paths and devices, therefore failing to install itself on the ESP, returning the cryptic error
The error is misleading! /dev is mounted if you follow my instructions below. The actual problem, as I understand it, is that there is a discrepancy between the mounted device and the path to the chroot root. That's why I had you mount only the subvolume containing the root filesystem in the steps above. If you were not paying attention, you are not following the instructions step-by-step, you rebooted before this step or just came here directly looking for a solution to your problem about GRUB not installing look above for instructions on mounting the correct btrfs subvolume.
- We need to prepare the chroot environment. The ESP must be mounted in the correct place and we have to bind system mount point for some special trees (most notably /dev). Moreover, we will copy the resolv.conf file to let the chroot environment have network access should it need it.
- Finally we enter the chroot environment and install Grub in a way suitable for a removable device (see the first caveat above).
Now your external HDD is bootable. Reboot your computer, select it from the boot media selection of your UEFI BIOS and you're done!
If you are Ubuntu's fan and want to try out its latest Focal Fossa 20.04 LTS Linux distro, then you can do it using a bootable USB drive created on Windows 10/7/8…
Well, the Ubuntu 20.04 is here and we can try it out before the actual launch slated at the end of April 2020. The focal fossa bootable ISO file is available to download which we can try out directly on Virtual Machines; however, those want to install or test it Live on PC they can create a bootable drive using software like Rufus.
Although it is very simple to create a bootable drive using Rufus, still, those are new to it they can see the below-given steps. Memorex cd dvd labels.
Download Ubuntu 20.04 LTS ISO
If you already have downloaded Ubuntu 20.04 then simply move to next step and if not then here is the link to get its ISO file.
Get Rufus USB bootable creator
So, Rufus is the nifty software for creating Linux bootable USB drive on Windows 10 or 7. Go to Rufus.ie get this portable software, yes we don't need to install it just download the setup, double click on it and you are good to go.
Run Rufus and select Ubuntu 20.04 ISO
As Rufus gets opened you will see a couple of options, however, only two things which we need to be set: First, select the USB drive attached to your system that you want to use and second is the selection of ISO file of Focal Fossa. After that simply click on the start button. For more clear idea see the below screenshot.
Set Rufus to create Ubuntu 20.04 ISO bootable drive
Wait for a few minutes, once the USB drive becomes bootable the Rufus will show that.
Now, eject and insert the Ubuntu 20.04 bootable USB drive to the system where you want to LIVE test or install it. After that boot the PC with the same attached drive.
Make Ubuntu Bootable Usb
Also, See
